How To Install Foam Closure Strips for Metal Roofing?

If you have a residential or commercial metal roof, you may wonder how to ensure it’s fully sealed against the elements. One effective solution is to install foam closure strips. Foam closure strips provide a tight seal for the gaps between the metal panels, which helps to prevent water, air, and pests from penetrating the roof. 

Here’s a step-by-step guide on how to install foam closure strips for metal roofing:

Step 1: Gather your materials

To get started, you’ll need to gather the necessary materials. Here’s a list of what you’ll need:

1. Foam closure strips: These come in various sizes and shapes, so be sure to get the ones compatible with your metal roofing panels.
2. Measuring tape: You’ll need to measure the length and width of the roof to determine how many closure strips you’ll need.
3. Metal snips: These will be used to cut the foam closure strips to size.
4. Utility knife: You’ll need this to cut the metal panels as needed.
5. Screw gun: Secure the foam closure strips to the metal panels with screws.
6. Screws: Be sure to use screws that are compatible with your metal panels.
7. Safety glasses: Always wear safety glasses when working with metal roofing.

Step 2: Measure the length and width of the roof

Before installing the foam closure strips, you’ll need to measure the length and width of the roof to determine how many strips you’ll need. Measure each panel individually and add them together to get the total roof length. Be sure also to measure the width of each panel.

Step 3: Cut the foam closure strips to size

Using your measuring tape, measure the length of each metal panel and cut the foam closure strips to match. You can use your metal snips to make the cuts.

Step 4: Install the foam closure strips

Starting at one end of the roof, place the foam closure strip on the top of the metal panel. The strip should be centered on the panel so that there’s an equal amount of strip on either side. 

Use your screw gun and screws to secure the strip to the panel. Repeat this process for each panel until the entire roof is covered with foam closure strips.

Step 5: Cut the metal panels as needed

You may find that some of the metal panels need to be cut to fit around obstacles such as vents or chimneys. Use your utility knife to cut the panels carefully as needed. Be sure to wear your safety glasses and take your time to ensure that the cuts are accurate.

Step 6: Secure the metal panels

Once all foam closure strips are installed, it’s time to secure the metal panels to the roof. Use your screw gun and screws to attach the panels to the roof. Be sure to space the screws evenly and securely fasten the panels to the roof.

Step 7: Finish the edges

To finish the roof’s edges, you can use metal edge flashing. Install the flashing along the roof’s edge and secure it with screws. This will help to prevent water from seeping into the roof.

Installing foam closure strips for metal roofing is a straightforward process that ensures your roof is fully sealed against the elements. Following these steps, you can install foam closure strips and enjoy the benefits of a well-sealed metal roof. Always wear your safety glasses and take your time to ensure the job is done right.

Why You Need Foam Closure Strips for Metal Roofing

You may wonder why you need foam closure strips if you have a metal roof. Foam closure strips are essential for metal roofing because they provide a tight seal between the metal panels, which helps to prevent water, air, and pests from penetrating the roof. If you have a metal roof, install foam closure strips to ensure your roof is fully sealed and protected against the elements. 

Here are some of the top reasons why you need foam closure strips for metal roofing:

Prevent water infiltration

One of the most significant benefits of foam closure strips is that they help to prevent water infiltration. When metal panels are installed on a roof, there are often small gaps between the panels where water can seep through. Foam closure strips are designed to fit snugly into these gaps, creating a tight seal that prevents water from entering the roof. This can help to prevent water damage to the roof and the underlying structure of your home.

Increase energy efficiency

Foam closure strips can also help increase your home’s energy efficiency. When there are gaps between metal roofing panels, air can seep through, which can cause drafts and energy loss. By sealing these gaps with foam closure strips, you can reduce air infiltration and improve your home’s energy efficiency. This can reduce heating and cooling costs and make your home more comfortable.

Prevent pests from entering the roof

Another benefit of foam closure strips is that they can help to prevent pests from entering the roof. When there are gaps between metal panels, small animals and insects can find their way into the roof, thus causing damage. Foam closure strips create a barrier that prevents pests from entering the roof, helping to protect your home and prolong the lifespan of your roof.

Reduce noise

Metal roofing can be noisy, especially during heavy rain or hail. Foam closure strips can help to reduce the noise level by providing a cushion between the metal panels. This can make your home quieter and more comfortable.

Improve the appearance of your roof

Foam closure strips can also improve the appearance of your metal roof. When installed correctly, they create a clean, uniform look that enhances the overall appearance of your home.